Face Mask Ffp2 Black with Ce Certificate 1 unit

Non-woven fabric. Does not contain PP or fibreglass.

The instructions for use of the FFP2 Black Mask are as follows:
1. Preparation: Wash hands thoroughly before handling the mask.
2. Fitting: Hold the mask in one hand, with the nose clip facing towards the fingers and the straps hanging down.
3. Fitting: Place the mask over the face, completely covering the nose and mouth. Fit the nose clip to the nose and ensure that the edges of the mask are in direct contact with the face.
4. Verification: To verify that the mask fits properly, perform a positive and negative pressure check.
5. Negative pressure check: Place both hands on the mask and inhale sharply. The mask should sink slightly towards the face. If you notice air leaks, readjust the nose clip and head straps.
6. Positive pressure check: Place both hands on the mask and exhale sharply. No air should escape from the mask if it is correctly fitted to the face.
7. Removal: To remove the mask, wash your hands, and avoid touching the front of the mask. Remove the mask by pulling on the elastic straps, without touching the centre surface of the mask.
These detailed instructions are essential to ensure proper fit and effective protection when using the black FFP2 mask.

Advantages of the FFP2 Black Mask include:

- High filtration efficiency: With a filtration efficiency of over 94%, the FFP2 Black Respirator can help filter out a wide range of airborne particles, making it suitable for environments where exposure to airborne particles poses a health risk.

- Respiratory protection: Certified as a respiratory protection device, this filtering facepiece is designed to protect the wearer against airborne particles, making it suitable for the prevention of respiratory contagion.

- Fit and comfort: The black FFP2 respirator is designed for a secure and comfortable fit, making it suitable for extended wear.

These advantages make the black FFP2 respirator an effective choice for respiratory protection in a variety of environments.

The features of the FFP2 Black respirator are as follows:

- Colour: Black
- Layers: 5
- Size: Adult
- Includes earsaver
- Material: Non-woven fabric. Does not contain PP or fibreglass
- Washable: No
- Storage: Temperature: -20 to +30°C, relative humidity: <80%, shelf life: 3 years after manufacture
- Filtration efficiency: > 94%.
- Inspiration resistance: < 350
- Expiration resistance: < 250
- Standards: EN 149:2001+A1:2009

These features make it an effective respiratory protection device for the filtration of airborne particles and the prevention of respiratory tract infection.

It is essential to ensure that the FFP2 mask is properly fitted to the face to ensure its effectiveness. Before use, check for damage and perform a positive and negative pressure check to ensure that the mask fits properly. Also, remember that the FFP2 respirator is designed for single use only and should be discarded when clogged or damaged. Always wash your hands before and after handling the mask to ensure adequate protection.